Combining 2 Router (ISP) in 1 Network

Combining 2 Router (ISP) in 1 Network

Have you ever tried using 2 ISP (Internet Service Provider) into one network your network?. Ok, for those of you who have never tried and want to know how to setting 2 for 1 ISP network local area, look we've ever tried tutorian

Actually, should we use 2 ISP's?
it will respond if one of the ISP connections satah we're troubel or missing conektion while revenue or business we have to keep going. 

CAUTION: The following tutorial

• DHCP Disabled
• If you use the Router 1 IP 192.168.1.1 then set your router to two
  IP. 192.168.1.2
• Open the Network Network Conection, the Local Area Conection right click mouse
  and then click Properties
• Select Internet Protocol (TCP / IP) and click Properties 
• Centrang Use the "following IP address" and enter the IP address the computer as an example
  picture below

• IP address for the computer and the client computer must start from 192.168.1.3 to
  so on.
• To Gatway, enter the IP Router 1 is 192.168.1.1 
• Enter the DNS IP number.
• To Gatway Router to 2 in the switch on the network, click "Advanced"
• Click on "Add" and enter the IP Address Router 2 is 192.168.1.2 then click
  "Add" as shown below. 

• Then click DNS, it will show the first two DNS on the router, for adding control to the second router, click "Add" and enter the IP no The first DNS from router to 2, then click "add", repeat once again for enter a second DNS IP from the router to the 2.

• Then click 'Ok', then click "Ok" again, then click "Close" to exit the Network settings.
• Perform Network settings on other computers in the same way, which is different from the IP adressnya, do not have the same starting from 192.168.1.4 dst.

Similarly, we review a tutorial from time to combine the two routers and two ISP (Provider) will be able to work in a network and at the same time are able to share printers and documents.

Good luck yahh ...